Monday, October 3, 2022

Tricks and Treats

Good morning. I am taking a break from Christmas cards with a Halloween card today using products from Picket Fence Studios

I created the card front by adding a patterned paper border at the top portion and then cutting out circle with a inside/out stitched die and attaching the cellophane in the opening. I then stamped several of the small Halloween icons to the bottom along with the sentiment all from the Here for All the Boos stamp set. To create the shaker sandwich I stamped the card base with one of the ghosts also from the Here for All the Boos four times onto the card front for the backing. I filled the shaker spot with a combo of pieces from the Spooky Town Sequin Mix plus some purple pieces from another sequin mix that is no longer in stock. I added Foam Tape to the back, then placed on the card front incapsulating the shaker mix. Lastly, I cut out one of the ghosts from the Three Ghastly Friends from white textured cardstock, then added to the card front using foam dimensionals. 

Products: Picket Fence Studios stamps and dies, Doodlebug dp, PTI cs, PFS Sequins, Altenew and Simon Says ink, Copic Markers
Copics: YR01, YR02, YR04, YG01, YG03

I am submitting this to the Color Hues #50 Challenge of Orange and Purple. 


I hope you have a great week. Thank you for stopping by. 

photo signaturecopy_zpsn7wywovz.png

Saturday, October 1, 2022

Caffeinated Christmas Challenge #10 - Gnome

I am happy to be guest designing for the Caffeinated Christmas Challenge #10 today. 


To play, link up a newly created Christmas themed card with at least one gnome!  Your card can be Coffee, Tea or Hot Cocoa. The challenge runs until October 25. 


This month's sponsor is a $25 gift code to Miss Ink Stamps. You will see some of their cute products on my card today. 


I stamped the gnome image from the Miss Ink Stamps Big Mugs stamp set onto Copic friendly cardstock, colored with Copics and fussy cut out. To create the panel I used a Simon Says Wavy Scalloped Stiches die and a die from the Stitched Rectangles set to cut from white linen cardstock and patterned paper. I partially applied Picket Fence Studios Snowdrop White Paper Glaze over a Miss Ink Stamps Jitters Stencil to create a bit of "snow" on the white portion of the panel. The sentiment from the Miss Ink Stamps Season's Greetings set was stamped using Versamark ink on a red cardstock strip and white heat embossed. Both the image and sentiment strip were attached to the card front using foam dimensionals. 


Products: Miss Ink Stamps, Doodlebug dp, PTI cs, Picket Fence Studios Paper Glaze, Miss Ink Stamps Stencil, Simon Says dies, Altenew and Versamark ink, Copic Markers
Copics: Skin-E00, E01, E11, R02; Beard/Hair-C1, C3; Clothing-R20, R24, R27; Boots-T1, T3, T5; Cup-B000, B01, B04, E81
  • Please link NEWLY created cards. No backlinking.
  • Please link up cards only.
  • Any products can be used with the exception of counterfeit products. 
  • No digital projects please, only digital images that are printed and incorporated in your design.  
  • Please link back to this post and include the challenge graphic.
  • Use #caffeinatedchristmascardchallenge  #cccc10
  •  Just a reminder that cards should have a definite Christmas theme along with at least one gnome.
I hope to see you in the gallery.

photo signaturecopy_zpsn7wywovz.png

Thursday, September 29, 2022

Happy Holidays to You & Yours {Purple Onion Designs}

Whenever I am feeling a little down, I reach for my Purple Onion Designs stamps. There is just something about the sweet expressions on all the critters illustrated by Stacey Yacula (@staceyyacula) that make me smile.


One of my favorite images is Cedar (fox) and after stamping him onto Copic friendly cardstock, I colored with Copic markers and fussy cut out. To give him a wooded background I blended pinefeather and soft stone ink onto a stitched panel using the Hero Arts Birch Trees Stencil. After attaching Birch to the panel using foam dimensionals, I added a sentiment from the Holiday Blurbs set stamped with pinefeather ink. I used the Picket Fence Studios String of Lights die to cut from white cardstock and and added carribean ocean Nuvo drops to represent the lights, attaching to the trees for a festive feel in the forest.

Products: Purple Onion Designs Stamps, PTI cs, Hero Arts Stencil, Lil Inker Designs and Picket Fence Studios die, Nuvo Drops, Altenew and PTI ink, Copic Markers
Copics: Fox-W00, E81, E11, E13, E81, E15; Hat/Scarf-BG10, BG11, BG72

September has really flown by for me. How about you?

photo signaturecopy_zpsn7wywovz.png

Monday, September 26, 2022

A Day for Snowflakes {Picket Fence Studios}

Today's cards feature the big snowflakes dies from Picket Fence Studios

I started out by using the Snowflake Frost Die to cut from vellum for the mat portion and linen cardstock for the actual snowflake. I painted on some Sparkle Paper Glitz for a hint of shine on the snowflake. While the snowflake dried, I blended Rudolph's Nose Velvet Glaze over the Christmas Ornaments 6x6 Stencil using a Mixed Media Spatula onto white cardstock, eliminating the ornament top and bow portion. After the piece dried, I cut it out with a circle die. I stamped the smallest holly and berry leaves from the Seasonal Christmas Flowers twice onto Copic friendly cardstock, cut out with the matching die and colored with Copic markers, attaching to the top of the ornament.I also painted on Mistletoe Velvet Glaze onto the edge of a piece of cardstock, and then cut off two small strips for borders when dried. The sentiment from the Swanky Christmas Sentiments was stamped directly onto the card front using gala red ink. After attaching the matted snowflake, I added the ornament circle using a layer of craft foam and the border strips for contrast. 

Products: Picket Fence Studios stamps, dies and stencil, PTI cs, Paper Source Vellum, PFS Velvet Glaze, Altenew and WPlus9 ink, Copic Markers
Copics: Leaves-G12, G14, G17; Berries-R11, R14, R17


I nested both of the dies from 
Snowflake Crystal Die set to cut from both white linen and spring rain cardstock so that I cut have a "frame" around the snowflake. This resulted in a card front cutout as well and I assembled all of the pieces together and glued onto an acetate sheet. I added various Foam Tape on the back in order to capture the shaker pieces from the Plum Pudding Sequin MixWinter Snowfall Paper Velvet blended over the Winter Rings 6x6 Stencil in three of the corners added some texture. I added a few more of the sequins in the bottom left corner before the paper velvet dried. The sentiment from the There's a Feeling of Christmas was stamped onto a wild wisteria cardstock piece with silver metallic cording added for more sparkle. 

Products: Picket Fence Studios stamp, dies and stencil, MFT and PTI cs, PFS Sequin Mix and Paper Velvet, Paper Source cording, Altenew ink

I hope you've enjoyed this snow day!

photo signaturecopy_zpsn7wywovz.png

Friday, September 23, 2022

Merry Wishes

Good morning stamping friends. Today's card was created for the Caffeinated Christmas Card Challenge #9 to include candy or cookie. I managed to include both.



After stamping the images from the
Lawn Fawn Thanks a Latte set I cut out with the matching dies and colored with Copic markers. I also did the same for the gingerbread cookie from the Oh Snap stamp and die set. To prepare the background i stamped the Picket Fence Studios Brick Wall image onto a linen cardstock piece using soft stone ink, added a patterned paper border at the bottom, then cut out with a die from The Greetery Nordic Frames. After all the images were attached to the card front using foam dimensionals, I stamped the sentiment and flourish from the Lawn Fawn Tiny Tag Sayings set using cherry kisses ink. 

Products: Lawn Fawn stamps and dies, Picket Fence Studios stamp, Doodlebug dp, PTI and MFT cs, The Greetery die, Altenew and The Stamp Market ink, Copic Markers
Copics: Cup-BG000, BG01, R20, R21, R24, R27, E21, E23 E25, E40; Candy Canes-R20, R24 R27; Marshmallows-E40; Gingerbread Cookie-E50, E41, E53


Have a blessed day!

photo signaturecopy_zpsn7wywovz.png

Wednesday, September 21, 2022

Mr. Frost Comes to Town Card Kit {Picket Fence Studios}

The limited edition Mr. Frosty Comes to Town Kit is available to purchase now! Nicole will be showcasing the kit tonight in the Picket Fence Studios Facebook Community at 6pm CDT so be sure to check it out. 

I had so much fun creating projects from this kit which is filled with Christmas and winter goodness. This is the second kit from Picket Fence Studios and I know you are going to love it as much as I do. Everything I mention in bold is included in the kit. So let's get started!


First up is a slim line card. I stamped the snowman from the Snowone Else Like You stamp set onto Copic friendly cardstock, cut out with the matching die and colored with Copic markers. I used a die from the Slim Line Nested Rectangle Die Set to cut the Blue and Black Pearlescent Cardstock for the background then attached the image using a layer of craft foam. I painted on some Nordic Lights Paper Glaze Velvet onto plain white cardstock, then after the glaze dried, I cut out several snowflakes using the More Winter Snowflake Dies and applied a couple of layers of Sparkle Paper Glitz. The partial sentiment from the stamp set was stamped onto a strip of the White Pearlescent Cardstock using something borrowed ink. I cut a strip from the Cerulean Blue Cork Fabric, added a bit of Nordic Lights Paper Glaze Velvet on the ends, then cut some "fringe" using the piece as an additional scarf. It was attached and anchored with one of the snowflakes cut earlier. Another snowflake and a few the Snowflake Sequin/Clay Mix pieces provided the finishing touch. 

Copics: Snowman-W00, E81, R00, R01, R05, B21, YR01, YR04, B23, B26, R01, R05; Hat-C00, C1, C3, C5, B21, B23, B26; Holly/Berries-R11, R14, G12, G14; Ear Muffs-B21, B23, B26, G0000, G000, G00, G12; Scarf-B21, B23, B26


For my second card, I painted on the Sparkle Paper Glitz onto plain white cardstock. Once dried, I cut out all five snowflakes from the More Winter Snowflake Dies then attached to the Blue Pearlescent Cardstock background panel. Aren't they pretty? The sentiment from the Snowone Else Like You stamp set was stamped using dove gray ink onto a strip cut from the White Pearlescent Cardstock, then attached with foam dimensionals.   


For the third card I attached one of the Silver Snowflake Diecuts offset on the White Pearlescent Cardstock background panel. For the two layered snowflakes I used the largest die from the More Winter Snowflake Dies. To achieve the look I wanted I painted on the Nordic Lights Paper Glaze Velvet onto plain white cardstock, then cut out when dried and applied a couple of layers of Sparkle Paper Glitz. I then custom mixed the Nordic Lights and Sparkle Glitz and painted onto the plain white snowflake. The sentiment from the Snowone Else Like You stamp set was stamped directly onto the panel using dove gray ink A smattering of the Snowflake Sequin/Clay Mix pieces added even more sparkle. 


My extremely talented fellow design team members will have so much more to show you using this beautiful kit. 

photo signaturecopy_zpsn7wywovz.png

Tuesday, September 20, 2022

To all a Good Night {Picket Fence Studios}

Today's card was created using products from the September Picket Fence Studios release. 


Onto plain white cardstock, I blended on bright buttercup at the bottom to represent city lights, then faded jeans at the top and blueprint sketch distress ink along the edges to represent the night sky. After cutting out the inked piece with a stitched edge die, I stamped the sentiments from the To all a Good Night onto it using Versamark ink, then white heat embossed. I used the Slim Line City Skyline die to cut twice from smoke cardstock. I added the first piece a half an inch above the bottom of the background and trimmed off the edges. The second layer was offset from the first layer and attached with strategically placed foam dimensionals for a Christmas in the city look. A few sequins from the Winter Night Sequin Mix finished it up.

Products: Picket Fence Studios stamps and die, PTI and Simon Says cs, PFS Sequins, Ranger Distress and PTI ink

Have a blessed day.

photo signaturecopy_zpsn7wywovz.png

Saturday, September 17, 2022

STAMPtember 2022 {Simon Says Stamp and Picket Fence Studios}

Hello fellow stampers. I am excited to be playing along with the great people over at Simon Says Stamp for their annual STAMPtember. The collaboration of the day is with Picket Fence Studios! The STAMPtember sets are a limited edition and once they are gone, they are gone! 


I stamped the sweet reindeer image from the Trimming the Tree set, fussy cut out and colored with Copic markers. To prepared the background I partially blended Winter Snowfall Paper Glaze Velvet and Lime Zinnia Paper Glaze over the Slim Line Winter Rings Stencil using a spatula. After removing the stencil I quickly placed pieces from the Dancing Reindeer Embellishments jar onto the wet mix. After the background dried, I added a few more embellishments and a small strip of metallic cardstock. The sentiment from the set was stamped with Versamark and white heat embossed onto a red cardstock piece. Both the sentiment and stamped image were attached with foam dimensionals. 

Products: Picket Fence Studios stamps and stencil, PTI cs, PFS Paper Glaze and Sequin Mix, Altenew and Versamark ink, Copic Markers
Copics: Girl-E000, E0o, E11, R02, R22, R24, R27, YG00, YG01, YG03; Reindeer-E40, E41, E42 E44, E81



Be sure to shop while supplies last. Thanks for stopping by. 

photo signaturecopy_zpsn7wywovz.png

Thursday, September 15, 2022

Merry Christmas {Purple Onion Designs}

Good morning all. I have a clean and simple card for you today using stamps from Purple Onion Designs


After stamping Birch (bunny) onto Copic friendly cardstock, he was colored with Copic markers and fussy cut out. For the background, I stamped the Dusting of Snow image onto linen cardstock, then turned it around and stamped again using cherry kisses ink which is proving to be my favorite red. Using the same ink, I stamped the sentiment from the Sweetest Season Sentiment Set . This sweet, sweet bunny was attached using foam dimensionals. 

Products: Purple Onion Designs stamps, PTI cs, Altenew and The Stamp Market ink, Copic Markers

Copics: E40, E41, E42, E44, E81, R02, R20, R24, R27

I am submitting this to the Peace On Earth Christmas Challenge (#23)


Have a blessed day! 

photo signaturecopy_zpsn7wywovz.png

Wednesday, September 14, 2022

September 2022 Picket Fence Studios Release

Well hello there. It's the 14th of the month so it is time for the September Picket Fence Studios release. We are continuing with the fall and winter holidays and events so you will see Halloween, Fall/Thanksgiving and Christmas images in this release. 


We are celebrating the release with an Instahop on Instagram. If you want to participate in the Instahop start @picketfencestudios. There is a great prize available so be sure to check it out. You have until Sunday, September 18, 2022  at 11:59 CDT to participate.


For my first card, I cut a top folding A2 card base, then trimmed one inch off the left front side so that the front measured 3.25 by 5.5. For the inside exposed area, I used Caught in MyWeb to stamp with Versamark ink onto a purple cardstock strip and white heat embossed. I trimmed the piece to 1.25 by 5.5 and attached to the inside edge then adhered a couple of spider pieces from the Spidey Friends Sequin Plus Mix to the web image. I then cut a 3.25 by 5.5 gray cardstock piece and used the Slim Line Cloud Coverage Stencil and black soot ink to create a dark cloudy sky. I stamped the moon from the A Nightly Sky set released last month onto to the piece using Versamark ink, then silver metallic heat embossed it. I stamped the cat from the Cat Plays Fiddle to the Silver Moon onto white cardstock and cut out with the matching die and also stamped the sentiment using onto a black cardstock stitched edge circle and white heat embossed. Both pieces were attached to the card front using foam dimensionals with the cat tail hanging off the side of the card front. A few pieces from the Halloween Felines Sequin Mix finished it up. There are more views of this card on Instagram. 

Products: Picket Fence Studios stamps, die and stencil, Reverse Confetti dp, Simon Says, Bazzill and PTI cs, PFS Sequin Mix, Ranger Distress, Versamark and Altenew ink, Copic Markers
Copics: Fiddle-V12, V15, V17; Cat Eyes-YG01


I partially stamped the image from the Fall Colors are the Best of All stamp set onto Copic friendly cardstock, then cut out with a circle die and colored with Copic Markers. I splashed on some slightly watered down brown acrylic paint with a Fan Brush, then added more water to the paint and and tapped more of the mixture on to it. This way, I easily achieved different "splotch" sizes. While the piece dried, I blended harvest gold ink over the Shadow of Leaves Stencil around the circle cutout of the panel. The sentiment was stamped using rich cocoa ink. I placed the circle back in the cutout space and added a border cut from teal blue cardstock using one the dies from the Misshapen Stitched Circle Dies set. 

Products: Picket Fence Studios stamps, dies and stencil, PTI and Tonic Studios cs, Altenew, PTI and Memento ink, Copic Markers
Copics: Sunflower-E33, E35, E39, Y17, YR23, YR26, Apples-R37, R56, R59, YG91, YG93, YG95, R35; Leaf-BG70, BG72, BG75; Shadows-W00, W1, E81


I will share more projects from this release throughout the month. Now go to @picketfencestudios to start the Instahop.

photo signaturecopy_zpsn7wywovz.png

Tuesday, September 13, 2022

Christmas Animals {Picket Fence Studios}

I've been going through some personal things this month so please excuse my neglect. I pray life gets much better soon.

Since a new release is in a few days I thought I better get today's card posted especially since it's probably been completed for a month now. 


I stamped the bear. Santa's sleigh and gifts from A Polar Bear Christmas using black ink and the Christmas tree and banner were stamped using bamboo leaves ink. All were cut out with the matching dies and colored with Copic markers whee appropriate. The Glacier Scenery pieces were stamped using gray flannel ink and cut with the matching dies. The sentiment was stamped onto the small glacier using pure poppy ink. All the image pieces were attached using foam dimensionals against a cardstock background. The tree was decorated using the Scene Building Dies: String of Lights die.
Products: Picket Fence Studios stamps and dies, Simon Says and Reverse Confetti cs, Altenew, PTI and Memento ink
Copics: Glacier-B0000, B01; Bear-W00, E81,; Sweater-BG10, BG11, BG34, R21, R22, R24, E50, E51, E53; Tree/Stocking-YG01, YG03; Santa-R21, R24, YG01, YG03, E51, E53; Gifts-R21, R22, R24, BG11, BG34, YG01, YG03

And for some reason, I posted this to Instagram and Facebook but it did not make it to my blog so here it is.


I stamped the image from the Christmas Hello set which is part of the Animal Crackers line onto Copic friendly cardstock, cut out with the matching die and colored with Copic Markers. I placed the image onto a patterned paper square and attached to the background panel using craft foam, then added the sentiment also cut with the matching die. A few pieces from the Traditional Christmas Candy Mix finished it up.

Products: Picket Fence Studios stamps and dies, Doodlebug dp, PTI cs, PFS Sequin Mix, Altenew ink, Copic Markers
Copics: Bear-E50, E51, E53, R20, B0000, B01, B02; Bird-R30, R21, R32, R35, Y38, YG0000, YG01, YG03, YG23; Reindeer-E31, E33, E34, E35, R20, YG01, YG03, R30, R21, R32, R35; Bunny-W00, E81, R01, R30, R21, R32, R35; Pig-R0000, R01, R02, R20, YG0000, YG01, YG03, YG23; Cat-C1, C3, C5, R20, B0000, B01, B02; Dog-E40, E41, E42, N3, N5, N7, R30, R21, R32, R35

I hope to get my mind back on stamping soon. Blessings to all.

photo signaturecopy_zpsn7wywovz.png

Tuesday, September 6, 2022

Tis the Most Wonderful Time of the Year {The Cat's Pajamas}

Good morning. I hope all my USA readers enjoyed the long Labor Day weekend. I spent most of my time in my craft room cleaning up but I also had some time to create.

I printed the Melt My Ice  digital stamp and sentiment plus the snowflakes from the Snowy Sayings Digistamp/SVG set onto Copic friendly cardstock, then colored with Copic markers. I cut a frame for this adorable sheep couple by nesting two pierced dies onto candy kisses cardstock and attached with a layer of craft foam. i cut three snowflakes using Five Snowflakes Die (retired from TCP). 


Products: The Cat's Pajamas digital stamps, PTI and The Stamp Market cs, Simon Says dies, Copic Markers
Copics: Sheep-W00, W1, E81, C00, C1, C3, C5; Clothing/Skates-B91, B93, R22, R24, R27; Ice-W00, W1; Shadows-BG0000, BG000

Have a great week! 

photo signaturecopy_zpsn7wywovz.png

Wednesday, August 31, 2022

Animal Crackers: From Our Gang to Yours {PIcket Fence Studios}

Today's card is another Christmas card using products from the August Picket Fence Studios release.


After stamping the From Our Gang to Yours image onto Copic friendly cardstock, I cut out with the matching die and colored with Copic markers. The sentiment from the set was stamped using cherry kisses ink and also cut with its matching die. I cut out the background panel using a stitched edge die, then cut a circle from it and backed the space with patterned paper. The "snow" was cut out with a die from the Mountains Scene Building set, then stamped Winter Scenery Scene Building stamp using soft stone ink for a subtle look. I used my finger to randomly add streaks of Sparkle Paper Glitz. The image and sentiment were attached using a layer of craft foam. 

Products: Picket Fence Studios stamps and dies, Avery Elle dp, PTI cs, PFS Paper Glaze, Hero Arts glitter, Altenew and The Stamp Market ink, Copic Markers
Copics: Santa-E00, E01, E11, C00, C1, R21, R22, R24, N3, N5, N7; Reindeer-W1, W2, W5, R20, E21, E23, R21, R22, R24; Bear-E31, E33, E35, W00, E81, YG01, YG03, YG25; Bird-R21, R22, R24, Y38, N3, N5; Bunny-W00, E81, R01, YG01, YG03, YG25; Cat-YR31, Y21, YR24, W00, E81, R21, R22, R24; Pig- R00, R01, R02, YG01, YG03, YG05

There is a 10% discount ff you purchase the whole set of Animal Crackers consistng of three stamps and three matching die sets. 

photo signaturecopy_zpsn7wywovz.png

Monday, August 29, 2022

Fa La La

I created todays cards with some products that have been sitting in my unused box way too long. 

I first stamped the backgrounds using the Ellen Hutson Fa La La  stamp onto linen cardstock. The pine needles were cut using  The Greetery Pine Wisp Die. I inked one set of three with peeled paint and forest moss distress ink for a traditional look and a set of two with distress oxide iced spruce and bundled sage for a softer look. 

To anchor the pine wisps I added a strip of silver metallic cardstock and a bow cut with a die from the The Greetery Fit to Be Tied set on the first card. For the second one I wrapped silver cording around the image panel, tied in a bow, then glued down portions of the strands. A few pieces of crushed glass were glued onto the pine wishp\s. Both image panels were attached to their respective card bases with a layer of Foam Tape

Products: Ellen Hutson stamp, The Greetery Dies, PTI cs, Michael's metallic cs, Paper Source cording, Ranger Distress inks

Let's all have a great week! Blessings to you all.

photo signaturecopy_zpsn7wywovz.png

Sunday, August 28, 2022

Picket Fence Studios and Heffy Doodle Collaboration



The Picket Fence Studios Design Team members are collaborating with Heffy Doodle today with an Instahop.  If you want to participate in the Instahop start @picketfencestudios. There are prizes available so be sure to check it out. Winners will be announced September 8.

I started out by spraying the back of the Tall Christmas Trees 6x6 Stencil with Pixie Spray, then layered over a piece of paper from the Heffy Doodle Man Cave 6x6 pad (anchored down with strips of low tack tape from the Heffy Doodle Memo Tape Dispenser). I spread Arctic Fox Paper Glaze Luxe over the stencil using the Mixed Media Spatulas. While the glaze was still wet I quickly "decorated" the tree with pieces from the White Bottlecap Flowers. Now this is when I realized I may have messed up because I needed to run this through my diecutting machine with all those sequins on it using a die from the Slim Line Nested Rectangle Die set. But it took it like a champ with not one sequin popping off.


I cut a second piece of the paper from the same pad, then added both to the slim line card base with a border strip of silver metallic cardstock using that sweet Heffy Doodle Glubert. The sentiment from the Joyeux Noel set was stamped direct to paper using blueberry ink. A couple of snowflakes from the Joyeux Noel set was stamped with silvery shimmer ink, cut out with the matching die and attached with foam dimensionals. 

Products: Picket Fence Studios stamps, dies and stencil, Heffy Doodle dp, PTI cs, Michael's metallic cs, PFS Paper Glaze Luxe and Sequins, MFT and Delicata Ink


Thank you for stopping by today and don't forget to hop on over to Instagram for a chance to win a prize and to see all the beautiful projects my fellow design team members have created. 

photo signaturecopy_zpsn7wywovz.png

Friday, August 26, 2022

Bee Balm

Our small church group of women have been meeting for dinner every two weeks when possible during the summer for fun and fellowship. Last Thursday was our last dinner since we are transitioning to a fall church wide study in September. I used several different products to package up a Burt's Bees Lip Balm for each as a simple token of gratitude. 


I worked in assembly line style so I first created the bees using The Greetery Honey Bees die set, cut from true black, harvest gold and white linen cardstock. I added a bit of color to wings with an E81 Copic pen and then assembled the bees. 


Next I created the packaging using the Papertrey Ink Tag Sale #1 Die which I elongated plus used some off the plate die cutting so I could fold up in order to secure the lip balm. I then created the cutouts using the My Favorite Things Lip Balm Window & Frame. I originally thought I would strictly use a yellow, black and white color scheme but at the last minute decided I wanted to add more color, thus the hawaiian shores frame. I used the Picket Fence Studios Hexagon Randomness Stencil with Aztec Sunflowers Paper Glaze Luxe to partially add the small hexagons and then lightly blended bright buttercup ink on the opposite side. 


I cut the leaves from green parakeet cardstock using a die from The Greetery Summer Findings Die set and a flower from the Spring Findings Die set. I was a little "extra" by cutting the tiny flower center to match the lip balm cap. After attaching the bee, leaves and flower to each, I inserted and glued down the back of the  Lip Balm Pouches, added the lip balm, folded up the tag and tied with yellow cording. 


Products: The Greetery, Papertrey Ink and My Favorite Things dies, PTI cs, Picket Fence Studios Stencil and Paper Glaze, MFT Lip Balm pouches, PTI ink

Can you believe it took all these products for these tiny little packages?

photo signaturecopy_zpsn7wywovz.png